Weber Weberfloor 4310

Weberfloor Fibre 4310 is a self-smoothing base and renovation screed — also referred to as a self-levelling compound or self-levelling screed — which can be applied to depths of 5-50mm used for levelling:

• Concrete.
• Sand/cement screeds.
• Anhydrite screeds.
• Wooden boards.
• Underfloor heating/warming.
• Insulation boards.
• Existing tiles.
• Bitumen.

Weberfloor Fibre 4310 is suitable for covering with:

• Tiles.
• Timber laminate.
• Vinyl/ Linoleum.
• Carpet.
• Laminate flooring.
• Parquet flooring*.

Suitable for use in residential and commercial areas, light foot traffic is possible after 2-4 hours in normal conditions, tiling is possible after 12 hours and final floor coverings other than tiles can be installed in as little as 3 days, depending on layer thickness and site conditions.

• May require extended time before covering.

Features & Benefits:

• For application depths between 5-50mm.
• Weber Low Dust TechnologyTM improves the comfort of applicators.
• Pump or hand applied.
• Rapid drying.
• Foot traffic after 2-4 hours.
• Tile after 12 hours.
• Final floor covering installed in as little as 3 days, depending on layer thickness and site conditions.
• Fibre modified for added durability.
• Low alkalinity.
• Casein-free.
• Low emissions.